The comprehensive talent concept of "selecting, educating, using and retaining" that unites people with careers
Job title
Address
Benefits
Number of recruiters
Deadline
Fuze security engineer
Ningbo, Zhejiang
Discuss personally
unlimited
No deadline
Responsibilities:
1. Responsible for the design, development and verification of fuze security mechanism to ensure the reliability and safety of products;
2. Participate in the design of key security mechanisms in fuze system, optimize its protection capability and operational stability;
3. Responsible for the strength and durability analysis of mechanical components and the evaluation of the performance of security mechanisms in extreme environments;
4. Use CAD, SolidWorks and other software for fuze structure design and simulation, complete the detailed design drawings;
5. Participate in product testing, conduct performance verification, fault analysis and improvement of fuze security mechanism;
6. Work closely with process, test and R&D teams;
7. Research the latest development trend of fuze security technology at home and abroad, and apply it to product innovation design.
Requirements:
1. Bachelor degree or above, major in mechanical design, ordnance engineering, explosion mechanics, etc.;
2. Experience in fuze security mechanism design, familiar with safety design standards and requirements of military products;
3. Familiar with explosion mechanics, shock and vibration analysis methods, be able to evaluate the reliability of the security mechanism;
4. Master CAD, SolidWorks and other design software, able to independently complete the organization design and analysis;
5. Good problem solving skills, able to deal with complex design challenges and make technological breakthroughs;
6. Team work ability, able to work closely with multiple departments to promote project progress;
7. Experience in defense and military products is preferred, and understanding of relevant standards and processes in the military industry is preferred.
Address:
Ningbo, Zhejiang
Number of recruiters:
unlimited
Deadline:
No deadline
Submit
Rf hardware engineer
Ningbo, Zhejiang
Discuss personally
unlimited
No deadline
Responsibilities:
1. Responsible for RF circuit design, development and debugging, including antenna, power amplifier, filter and other RF device optimization;
2. Design the schematic diagram and PCB of RF front-end module to ensure stable performance;
3. Participate in RF signal transmission and reception analysis to optimize communication performance;
4. Use spectrum analyzer, network analyzer and other equipment for testing and debugging;
5. Cooperate with software and hardware teams to solve RF related technical problems;
6. Tracking the cutting-edge trends of RF technology and proposing innovative solutions.
Requirements:
1. Bachelor degree or above, major in communication engineering, electronic information, microwave technology, radio frequency engineering or related;
2. Familiar with RF circuit design and debugging, with antenna, amplifier, filter and other module design experience;
3. Master the common problems and optimization methods of RF system;
4. Skilled use of spectrum analyzer, network analyzer, signal generator and other testing instruments;
5. Have a solid analog circuit and digital circuit foundation;
6. Good communication and collaboration skills, able to work closely with the team;
7. Project experience is preferred, experience in radio frequency hardware design related to wireless communication or satellite positioning is preferred.
Address:
Ningbo, Zhejiang
Number of recruiters:
unlimited
Deadline:
No deadline
Submit
Mechanical structural designer
Ningbo, Zhejiang
Discuss personally
unlimited
No deadline
Responsibilities:
1. Responsible for the mechanical structure design of the product, including the design and optimization of exterior parts and internal components, to ensure the manufacturability and reliability of the product;
2. Conduct 3D modeling and 2D drawing, and cooperate to complete product structural design review;
3. Participate in product material selection, mold design and process verification, optimize the production process;
4. Follow up the trial production and mass production process of the products, solve the technical problems related to the mechanical structure, and ensure that the products meet the design requirements;
5. Cooperate with industrial designers and electronic engineers to promote the combination and landing of product appearance design and structural design;
6. Continue to optimize the structural design of existing products, reduce costs, improve production efficiency and product quality.
Requirements:
1. Bachelor degree or above, major in mechanical design, mechanical engineering, material engineering or related;
2. Skilled use of CAD, SolidWorks, Pro/E and other 3D design software for structural design;
3. Familiar with the characteristics of plastic and metal materials, understand the relevant molding process (such as injection molding, stamping, casting, etc.);
4. Have a solid mechanical structure design foundation, can carry out mechanical strength, heat dissipation, durability and other aspects of analysis and optimization;
5. Have rich experience in product structure design, with the ability to follow up projects from design to mass production;
6. Good teamwork and communication skills, able to cooperate with multiple departments to complete product development;
7. Experience in industrial equipment and aerospace design is preferred.
Address:
Ningbo, Zhejiang
Number of recruiters:
unlimited
Deadline:
No deadline
Submit
Embedded Software Engineer
Ningbo, Zhejiang
Discuss personally
unlimited
No deadline
Responsibilities:
1. Responsible for the development, debugging and maintenance of embedded software, and developing related applications based on STM32 platform;
2. Write and optimize the underlying drivers of embedded systems to ensure the reliability and stability of the system;
3. Participate in product demand analysis, design and implement corresponding software solutions;
4. Cooperate with hardware engineers to debug the joint adjustment of hardware and software;
5. Write relevant technical documents and test documents to ensure code quality.
Requirements:
1. Bachelor degree or above in electronic information, computer, automation and other related majors;
2. Familiar with STM32 series single-chip microcomputer, with STM32 peripheral driver development experience;
3. Have some embedded real-time operating system development experience (such as FreeRTOS, etc.), relevant experience is preferred;
4. Proficient in C/C++ programming language, familiar with Keil, IAR and other development environment;
5. With strong logical thinking ability, able to independently complete the development and debugging of embedded systems;
6. Good team work spirit and can work under pressure.
The extra point column:
- Familiar with CAN, I2C, SPI, UART and other common communication protocols;
- Experience in low power optimization of MCU modules;
- Involvement in embedded system developers in military industry is preferred.
Address:
Ningbo, Zhejiang
Number of recruiters:
unlimited
Deadline:
No deadline
Submit
Circuit design and simulation engineer
Ningbo, Zhejiang
Discuss personally
unlimited
No deadline
Responsibilities:
1. Responsible for the design, analysis and optimization of high-reliability military-grade circuits;
2. Design amplifier circuit, filter circuit, signal processing circuit, and conduct comprehensive simulation verification;
3. Participate in the design of sensor signal acquisition module, including signal conditioning, filtering and amplifier circuit development;
4. Use Multisim, LTspice, PSpice and other simulation tools for circuit function verification and performance optimization;
5. Analyze the electromagnetic compatibility (EMC) of the circuit and provide optimization schemes;
6. Participate in the design and integration of hardware system, and cooperate with embedded engineers to complete system debugging;
7. Output detailed design documents, simulation analysis reports and verification test (DVT) reports;
8. Provide technical support to solve circuit related problems during R&D, production and commissioning.
Requirements:
1. Master degree or above;
2. Major in electronic engineering, circuit and system, automation, etc.
Address:
Ningbo, Zhejiang
Number of recruiters:
unlimited
Deadline:
No deadline
Submit
Control engineer
Ningbo, Zhejiang
Discuss personally
unlimited
No deadline
Responsibilities:
1. Responsible for the control algorithm development and optimization of servo motor and stepper motor, including position control, speed control, torque control, etc.;
2. Design and optimize the control strategy of the motor drive system to improve the dynamic performance and stability of the system;
3. Participate in the embedded development of motor control software, complete the implementation of PID, sliding mode control and other algorithms;
4. Modeling, simulation and debugging of motor system, analysis and optimization of control parameters;
5. Responsible for the testing, calibration and fault diagnosis of the motor control system to ensure the reliability and accuracy of the system;
6. Cooperate with hardware and circuit design team to optimize drive circuit, power module and communication interface design;
7. Participated in project evaluation, proposed motor selection suggestions, and optimized system design schemes;
8. Write relevant technical documents, output design specifications, debugging reports, etc.
Requirements:
1. Education: Bachelor degree or above, major in electrical engineering, automation, control engineering, mechatronics, etc.
2. Professional skills: familiar with motor control theory, proficient in PID, FOC, sliding mode control and other control algorithms;
3. Familiar with stepper motor, servo motor and its driving principle, have practical control development experience;
4. Master C/C++ programming, familiar with embedded system development, STM32, DSP (such as TI C2000 series) or FPGA development experience is preferred;
Skilled use of MATLAB/Simulink and other tools for control system modeling and simulation;
5. Understand common communication protocols (such as CAN, RS485, SPI, I2C, etc.) and can carry out related development;
6. Experience: Experience in related motor control projects is preferred, experience in product development and system debugging is preferred;
7. Comprehensive ability: strong mathematical analysis ability and problem solving ability;
8. Have team spirit, good communication skills and project execution ability;
9. With strong hands-on ability, can independently complete the construction and debugging of the control system.
Bonus points (preferred) :
1. Experience in BLDC (brushless DC motor) and PMSM (permanent magnet synchronous motor) control;
2. Familiar with high-precision servo control applications, such as robots, power tools, CNC machine tools, etc.
3. Experience in power electronics, inverter, switching power supply design is preferred;
4. Participated in motor control projects in industrial automation, drones, smart home and other fields.
Address:
Ningbo, Zhejiang
Number of recruiters:
unlimited
Deadline:
No deadline
Submit
Flying hand and assembly of traversal aircraft
Ningbo, Zhejiang
Discuss personally
unlimited
No deadline
Responsibilities:
Bachelor degree or above, familiar with type selection, assembly, commissioning and after-sales service.
Requirements:
Address:
Ningbo, Zhejiang
Number of recruiters:
unlimited
Deadline:
No deadline
Submit
In order to meet the needs of the company's rapid development, we are currently seeking the following personnel. If you are interested, please contact me!
Zhejiang Public network security No. 33021102001105
